Sample Concentrator SMI-SC200-1
Home ≫Heating & Environment>Sample Concentrators>Sample Concentrator SMI-SC200-1
Sample Concentrator SMI-SC200-1
CLICK TO SCAN
Description
The JINDAL nitrogen concentrator is mainly used for enrichment of large-volume samples or preparations (such as drug screening, hormone analysis, liquid phase, and mass spectrometry in the analysis of sample preparation). Working principle: the nitrogen enters the heated surface of the sample and makes the solvent evaporate and separate rapidly, thereby reaching the sample enrichment purpose without oxygen, keeping the sample purer. Nitrogen concentrator instruments can concentrate dozens of samples simultaneously, saving time and ensuring high efficiency, instead of rotary evaporation instruments.
Latest Ergonomic Features:
- Synchronously working with heating by a dry bath in the bottom and nitrogen blowing on the surface accelerates liquid evaporation and sample concentration.
- The position of the gas needle in the air cavity can be adjusted to suit different types of tubes.
- The height of the air cavity can be adjusted. The length of a standard gas needle is 150 mm.
- The gas needle is controlled independently. Separate blowing of each needle and flow regulating of each needle are available to avoid gas waste.
- The entire equipment can be put into a ventilation cabinet when concentrating the samples in toxic solvents.
- Built-in overheat protection, automatic fault detection, and fault beep alarm devices.
- LED displays immediate temperature and diminishing time.
- Operation is simple and convenient.
- Standard-configured air cavity and adjustable bracket.
Technical Data:
- Temp. Control Range: R.T.+5℃ ~150℃
- Temp. Setting Range: 5℃ ~150℃
- Temp. Stability@40~100℃: ≤±0.5℃
- Temp. Stability@100~150℃: ≤±1℃
- Block Temp. Uniformity@100℃: ≤±0.5℃
- Block Temp. Uniformity@150℃: ≤±1 ℃
- Temp. Display Accuracy: 0.1℃
- Heating Speed: ≤30min (40℃ to 150℃)
- Time Range: 1min ~99h59min or continuous
- Needle Plate Max. Lift Stroke: 285mm
- Gas-in Joint Outer Diameter: Φ7mm
- Nitrogen Pressure: ≤0.1MPa
- Nitrogen Flow Rate: 0 ~10L/min
- Needle Length: 150mm
- Sample Capacity: 1 standard block
- Voltage: AC 220V / AC 110V, 50/60Hz
- Power: 200W
- Dimension (WxDxH): 200 x 230 x 525mm
- Net Weight: 5.1kgs
Common Configuration:
- Optional blocks from DT01A to DT16A that can be interchanged easily
- Optional regulating valve
Optional Accessories:
Cat# | Spec | Dia. of hole | Hole bottom shape | Block dimension |
DT01A | 6 mm x 12 | 6.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT02A | 7 mm x 12 | 7.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT03A | 10 mm x 12 | 10.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT04A | 12 mm x 12 | 12.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT05A | 13 mm x 12 | 13.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT06 | 15 mm x 12 | 15.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT07 | 16 mm x 12 | 16.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT08 | 19 mm x 12 | 19.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT09 | 20 mm x 6 | 20.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT10 | 26 mm x 6 | 26.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT11 | 28 mm x 4 | 28.5 mm | flat bottom | 95.5 x 76.5 x 50 mm |
DT12 | 40 mm x 2 | 40.5 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT13A | 0.5 ml x 12 | 8 mm | Cone bottom | 95.5 x 76.5 x 50 mm |
DT14A | 1.5 ml x 12 | 10.8 mm | Cone bottom | 95.5 x 76.5 x 50 mm |
DT15A | 2.0 ml x 12 | 10.8 mm | Round bottom | 95.5 x 76.5 x 50 mm |
DT16A | 0.2 ml x 12 | 6.1 mm | Cone bottom | 95.5 x 76.5 x 50 mm |
DT19 | Customized | Customized | Customized | Customized |