The temperature range is from 10℃ to 60℃ controlled by a digital microprocessor temperature indicator cum controller within an accuracy & stability of ±0.1℃ .The temperature fluctuation in flask at 37℃ is ±0.1℃. The heaters linked to the microprocessor run on the PID function & the compressor runs in on/off operation. The temperature can be set in the Inc./Dec. of 0.1℃. The shaking speed can be adjusted from 20 to 300 rpm ±1 rpm within increments of 1rpm & is controlled by the precise microprocessor controller. A bright digital LCD 7” multicolor touch screen displays & monitors all the set parameters including temperature, Speed & time (1min to 999hr). The operator can program multistep programming (4 steps) in each program. Built-in self-diagnostic system along with over & under voltage protection system switches off the system in case of fault. Built in automatic shaking speed adjustment in case of unbalanced load/vibrations/shocks.

Independent alarm system (audio-visual) warns if the temperature deviates ±10C (adjustable) from the set point & speed varies ±2 rpm from the set speed (or even installed platform).

An audio-visual alarm at the end of the digital timing cycle is an added advantage. Bright LCD displays temperature, time & shaking speed digitally simultaneously on the same screen. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically. Built in independent over temperature cut off and over current breaker system. Built-in data logging can be done with an on-board USB port by using a pen drive & the complete system can be remotely operated through a computer by using on board Ethernet port.

An LED light for illumination inside the chamber. The chamber also consists of a built-in rust-free power socket for efficient operation.

The 112 Liter. capacity chamber consists of 18”X18” universal platform to hold various spring based clamps. The platforms can be interchanged easily as per the operator’s requirement.