S.M. Scientific Instruments (P) LTD

Co₂ Incubator SMI-132HTA1

Home ≫ Co2 Incubator> Co₂ Incubator SMI-132HTA1

Co₂ Incubator SMI-132HTA1

CLICK TO SCAN

Description

JINDAL CO2 Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature / CO2 on human tissues. Laboratories and medical professionals, world over, rely on our CO2 Incubators. The Incubator chamber made of electropolished stainless steel 304-grade with round corners.

Jindal’s CO2 Incubator uses Direct Heat, Air Jacketed Heating System which surrounds. This technique achieves accurate, uniform and highly responsive inbuilt temperature control within the chamber. Incubator has PID controlled circuitry for very quick recovery of CO2 level without overshoot. The CO2 Incubator has inbuilt BMS relays and also option to incorporate onto data monitoring and documentations modules.

Previous
Next
Enquire Now

All instruments functions including the temperature, CO2% and Humidity% of the incubator are programmable with a facility for audio- visual alarm to indicate when temperature deviates more than 1°C from setpoint and when program or time finished be there. The microprocessor-based interactive navigator touchscreen displays for convenient evaluation of unit’s performance, view instructions, monitor progress, decontamination and running log of all user interactions. Microprocessor based control system displayed CO2 level, temperature and other parameters. Display displayed parameters temperature and CO2% and alphanumeric message center easy to read, and easy to program with constant display of operating parameters and alphanumeric status messages. The CO2 incubator software command which allows tracking key operational information such as time, temperature, CO2 concentration and humidity. The CO2 incubator has dual wave Infrared (IR) CO2 sensor to maintain CO2 level accurate within 0.1%.

The CO2 incubator show graph performance trends over established timeframes and run event history logs- protected with user passcodes and control lockouts.

Optional Ultra Protection Systems

The Jindal CO2 incubator (Carbon dioxide control range: 0-20%. Control: ±0.1%) also comes with a programmable Ultraviolet Lamp, isolated from cell cultures, that sterilizes conditioned air and humidity water reservoir to avoid contamination without disturbing cell cultures in vitro. Incubator has an inline pressure regulator to ensure less gas consumption and prevent overshooting of pressure which shorten s life span of incubator.

Rapid Response “Class 100 product” affects the Yields and Reliability by airborne contamination costing valuable time and money. Class 100 HEPA Filter Flow System air quality provides an ideal culturing environment. CO2 Incubator has decontamination process not disassembly and removal of sensors, hardware or other components for separate autoclaving.

Utility Connections

  • Microbiological filters on all gas inlets and outlets and easily accessible sample ports

Gas Input Pressure

  • 0.1 MPa (1.bar 14.4 PSIG)

At a Glance

  • User friendly software
  • User settable temperature and % CO2 values
  • Seamless curved corners inner chamber
  • Alarm muted
  • Incubator include inner door
  • Building management system relays
  • Hold 3-12 stainless steel shelves
  • Audio alarm for outer door is opened and temperature 60℃
  • Automatically calibrating all electronic measurement and control functions
  • Floor heating system which directs heat transfer from heated floor to humidity reservoir
  • SS Enriched Contamination resistant interiors
  • Visual alert on touchscreen display when the gas supply low and needs changing
  • Display indicator for open/ close door
  • Replaceable fan wheel
  • Chamber wall insulation
  • TC & IR sensor not remove during heated decontamination
  • Power cord & plug
  • CRL cross-links high density

Performance Specifications

  • CO2 Concentration Range: 0 – 20%
  • CO2 Accuracy Error: +0.1 %
  • CO2 Stability and Readability: +0.1℃ @ 37°C
  • CO2 Control: 0.1%
  • CO2 Uniformity: +0.1℃ @ 37°C
  • CO2Temperature Range: Ambient 5℃ to 55°C
  • CO2 gas range incremental variation: 0.10%.
  • CO2 recovery time: 6 minutes after door open & close
  • CO2 sensor display :0-20%
  • CO2 event to attain: 5%
  • Temperature Readability: 0.1°C @ 37°C
  • Temperature Accuracy: ± 0.1°C @ 37°C
  • Temperature Stability: 0.1°C @ 37°C
  • Maximum spatial respectively ± 0.6
  • Temperature Uniformity Error: ± 0.25°C
  • Relative Humidity: 95% @ 37°C
  • Maximum temperature deviation over time ± 0.1

Electrical Requirements

  • 220 -240V AC, 50 Hz Single Phase.
  • Power Consumption: 500watt

Standard Features

  • All silicon tubing
  • Over Temperature protection
  • Audio-visual alarm system
  • Precision Integrated Circuit
  • Independent thermal protection

Six-Side Direct Heat

  • Efficient high-performance heaters located on every chamber surface, provide even temperature distribution throughout the entire chamber

Additional Accessories

  • Voltage stabilizer
  • Surge Protector
  • UPS with 20 minutes backup
  • 2 Nos. of CO2 Regulator
  • 2 Nos. of CO2 Cylinder
  • Rubber Hose Pipe
  • CO2 stacking kit
  • Adjustable levelling feet
  • 40 mm (1.5 in) access port
  • RS-232 communication Output
  • Automatic change from low pressure CO2 Cylinder to new cylinder understanding the pressure

Chamber Capacity Available

  • 90 Ltrs.
  • 150 Ltrs.
  • 240 Ltrs.
  • 400 Ltrs.

Weight

  • 95 kg

Fan Less Design

For reduce chance of contamination, reduce noise level, minimum air turbulence and bigger usable capacity. Efficient circulation minimizes variation between cultures, while preventing desiccation – no matter where your cultures are located in the incubator.

In-chamber CO₂ measuring technologies

CO2 sensors are positioned directly in the chamber right near your cultures – ensuring the most precise right near your cultures – ensuring the most precise control.

  • Advanced IR sensor with auto-zero programmable function technology for precise monitoring where temperature and humidity levels are less predictable

Convenient humidity reservoir and active rH control

To simplify maintenance and remove a potential source of contamination, models with the humidity tray for easy cleaning and refilling of distilled water. Incubator has 2 liter water reservoir that provide a high relative humidity (rH) with a water level sensor which indicates when a refill needed.

HEPA air filtration for air purity

Airborne particulates are a primary source of contamination in most lab settings. Our advanced HEPA filter technology protects your cultures, providing ISO Class 5 clean room-like air quality conditions within only five minutes after 3-6 minutes  door opening.

  • Chamber air is filtered every 60 seconds to ensure air quality.
  • Featuring a space saving configuration, the HEPA filter is readily replaceable with minimal

140° C dry heat sterilization

This safe and effective overnight high- temperature sterilization cycle is proven to effectively eliminate bacteria, mold, yeast, mycoplasma and even resistant spores, simplifying   cleaning   protocols and protecting cultures and personnel. No chemical use for decontamination.

Product Brochure

Product Brochure Link here