Rotary Evaporator (New Modular Design) SMI-NMD-REV-05
Home ≫Heating & Environment >Rotary Evaporator >Rotary Evaporator (New Modular
Design) SMI-NMD-REV-05
Rotary Evaporator (New Modular Design) SMI-NMD-REV-05
CLICK TO SCAN
Features
- Evaporating flask with an ejector, convenient to remove
- Vapour temperature
- Smooth start
- Built-in vacuum controller
- Low noise
- Solvents library
- Chemical resistance
- Gradient distillation
- Auto distillation
- Overheating protection
- Over-temperature protection
- Ground free condenser
- Secondary over temperature cut off is 100℃
- Stand with clamp to support condenser
- Highly resistant and particularly durable PTFE vacuum seals
- All glass components made of Borosilicate 3.3 glass
- Flashing and display of the residual heat warn of the risk of burns greater than 50℃
At a Glance
- Two integrated handles facilitate
- Secondary over temperature cut -off 250℃
- Single knob operation to adjust rotation speed & temperature for ease of operation
- Manual lifting and lowering of the flask
- Heating bath is made of SS Heater, Stainless Steel AISI 316L
- Evaporation capacity of 20ml/minute in case of high boiling solvents
- Cooling surface: 1460cm2
Technical Specification
Capacity | 4.5 Liter |
Display | Digital |
Rotating Speed | 20 to 800 rpm with microprocessor control |
Setting of Lower and stop | 60 mm |
Heating temperature range | 20 to 950C |
Temp Accuracy | ±2°C |
Lift | Hand |
Speed Display | Digital |
Height Adjustment Speed | Manual |
Relative Humidity | 90% |
Angle adjustable | 0 t0 350C |
Temperature display | Digital |
Timer Range | 0.0 Minute |
Cooling type | Vertical |
Protection Class | IP21 |
Motor | Brushless DC Motor |
Power | 1300W |
Rotation | Reversible Direction |
Interface | USB |
Stroke Displacement | 160 mm |
Evaporation Flask | 50 ml to 4000 ml |
Power Supply | AC110/220- 240V ±10%, 50Hz |
External Size (W* D* H) | 430 * 360 * 705 mm |
Package size (W * D * H) | 640 * 1100 * 650 mm |
Weight | 15 Kg |
Accessories | Evaporating Flask, Heating Bath, Receiving Flask, Connector, Vapour tube, borosilicate glass, Vacuum seal, Lubrication tube, adopters
|
Vacuum Pump
- Measurement range: 1400 – 1 mbar
- ECO-mode automatically activated after 1 hours with suction capacity of 1m3/h
- Ultimate vacuum: 7 mbar
- Chemically resistant PTFE diaphragm vacuum pump with a space saving design
- Timer function
- Vacuum regulation of set pressure
- Final vacuum (absolute) :10 mbar (± 2 mbar)
- Control range: 1100 – 1 mbar
- Measuring accuracy is ± 2 mbar (± I digit)
- Automatic ON/OFF control
- Automatic aeration when pressure above 1400 mbar
- Sound level : 48dB(A)
- Hysteresis Automatic 1 — 500 mbar
- Protection Class : IP 21
- 4’’ monochrome digital display
- Easy to use interface that controls the vacuum digitally
- Number of steps (heads) : 2 (2)
- Power consumption: 150W
- Temperature compensation: 0.07 mbar/K
- Regulated by the Digital Controller
- Suction capacity: 1.5 m 3/h
Re-Circulating Chiller
- Cooling Temperature range: 10°C to 25°C
- Vacuum seal and Vapor duct will be acid and solvent resistant
- Pump pressure: 0.6 bar
- Cooling capacity at 15℃: 530W
- Environmentally friendly
- Temperature accuracy: ± 1℃
- Cooling capacity : 754W
- Bath volume: 3L
- Flow rate: 2.5Lit/ min
- ON/OFF regulation when used in conjunction with the Interface