The temperature range is from 15°C to 80°C with accuracy of ±1°C and uniformity of ±1°C at 37°C controlled by a digital microprocessor based PID controller cum indicator. The heaters linked to the microprocessor run on the PID function & the compressor runs in on/off operation. The temperature can be set in the inc./dec. of 0.1°C. The shaking speed can be adjusted from 25 to 400RPM (accuracy of ±1RPM) within increments of 1 RPM. Shaking Shaker speed control at stepless continuously variable speed. A LCD display for monitors all the set parameters including temperature soft touch keypad, Speed & time. Shaker has timer with range of 99 hrs 59 minutes. Shaker consist cycle fan speed is automatic control. Built in self-diagnostic system along with over temperature and over& under voltage protection system switches off the system in case of fault. Shaker has single knob operation or keypad for speed and temperature. Shaker capable to handle heavy loads for continuous 24-hour operation on high speed.
An audio-visual alarm for alert if temperature or speed deviation above or below of set points. The microprocessor controller is designed to retain parameters during power failure & restarts the unit automatically once power restored. Built in independent over temperature thermostat for additional backup by control heat if main temperature control fail. Data logging can be done with on board RS232/USB port, the complete system can be remotely operated through a computer by using on board Ethernet port. Electrical outlet provide power for operating stirrers or rotators.
An internal LED/Fluorescent light provided for better visibility of samples. The shaker come with a moisture proof power socket/outlet inside the chamber. Shaker Safety interlock to stop shaking motion when the door is open. The shaker comes with a universal platform of size 18’x 18’ which can hold various sizes of test tubes and flasks from 50ml to 6Ltr.Clamps are made of single piece stainless steel and leaves tied with three spring. Design to operate on 230V 50Hz power AC supply. The platforms can be interchanged easily as per the operator’s requirement.